ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD.
Shenghong Heavy Industry Technology Co., Ltd., The company that focuses on providing customers with high-quality services
Add to Cart
Small powder feed production line for breeding plant for sale
The powdery organic fertilizer production line is one of the simple organic fertilizer production lines, also known as small-scale organic fertilizer production lines. The powdery organic fertilizer production line is suitable for many small farms, and its configuration is dehydration, drying, fermentation, crushing, mixing, and packaging.. The technological process is to ferment, decompose, crush, mix and package organic fertilizer raw materials, animal manure or domestic garbage, sludge, distiller's grains, biogas residue, etc., so as to complete the processing of powdered organic fertilizer.
| Model | Power(kw) | Granule Diameter(mm) | Roller Sheet Size(mm) | Dimensions(mm) |
| TDJZ-1T | 15 | 3-10 | 150*220 | 1450*800*1450 |
| TDJZ-1.5T | 22 | 3-10 | 150*300 | 1450*850*1500 |
| TDJZ-2T | 30 | 3-10 | 185*300 | 1630*850*1650 |
| TDJZ-3T | 37 | 3-10 | 300*300 | 1850*1100*2050 |
The production line includes:
Crawler Compost Turner--Forklift Feeder--Vertical Crusher--Screening Machine--Cache Silo--Powder Packing Scale.
Production process details:
1.Fermentation Process
At the beginning of the fermentation, about 60% of the material moisture enters the fermentation tank or stacked. The neophilia microorganisms in the compost use soluble and easily degradable organic matter as a source of nutrition and energy, rapidly proliferate, and release thermal energy, which causes the temperature of the compost to rise continuously.
When the material temperature reaches 60 degrees, the compost turner starts to turn the material. During the turning process, the bacteria are fully exposed to oxygen to accelerate the reproduction of bacteria and reduce the moisture of the material.
Until the temperature does not exceed about 50 degrees, stop fermentation and leave it there for 5-7 days, then the fermentation process is finished.
This whole fermentation process is about 20-25 days, but it depends on the condition of the materials and the local temperature.
2. Forklift Feeder, the function of this machine is to store the fermented materials and deliver the materials evenly and quantitatively to the next conveyor. The machine is equipped with a frequency converter, which can adjust the conveying speed of the belt conveyor. An anti -smashing net is added inside the silo, and the filling material is slowly spilled into the silo to prevent large pieces of material from damaging the equipment. The middle and lower parts of the silo are equipped with anti-blocking stirring device and silo wall vibrator to prevent blocking.
3. Crushing Process
Vertical crusher, the function of this machine is to crush the fermented material into powder of more than 40 mesh, and the moisture of the material should be controlled below 40%.
4. Screening Process
Rotary screening machine, the function of this machine is to screen the crushed materials, and the finished materials will enter the next link. Because the semi-wet materials are screened, the screen holes are easy to block, and anti-blocking hitting devices are Generally installed (same power as the main shaft). Large lumpy or granular materials sieved out can be fermented again or discarded according to their components. The mesh hole is 3-5 mm, and the material moisture is less than 20%, you can use 1 mm mesh, depending on the situation.
5.Cache Silo
The function of this machine is to store finished organic fertilizer materials. The machine is equipped with frequency converter to adjust the conveyor speed. It can realize the control of the packaging scale with electrical appliances to transport the materials as needed, and stop the transportation without the need to ensure that the powder packaging scale has a certain amount of materials at any time without causing blocking.
6.Packaging Process
Powdery packaging scale, the function of this machine is to quantitatively pack the finished materials (20-50 kg), with bucket (weigh the weight before the card bag, and directly drop the material after the card bag) and without bucket (the blank material after the card bag) Weighing) Two models, there are bucket scales equipped with automatic folding machine, automatic sewing machine, automatic cutting machine, only one person is required to operate.